 The
Hale 300 Wood Veneer Lateral Sectional File is an elegant addition to
any office, den or room.
The leg base and seperate top allows the stackable wood Lateral Sectional
File to be put together to meet individual space and user requirements.
This Wood Lateral Sectional Cabinet can be stacked one, two or three high(as
shown).
The Lateral Sectional File is available in Walnut, Oak and Birch wood
with solid hardwood drawer fronts machined to match the sectional raised
panel door. Solid hardwood ends are glued up, machined and mounted on
a solid wood frame of mortoise and tenon, assembly secured with glue and
heavy gauge staples.
Solid wood top rails and hardwood plywood backs are stapled into place
to give each unit strength and rigidity.
Finally, a Hale craftsman will install the file drawer using sturdy,
150 lb. capacity steel ball bearing drawer slides that will provide a
cushioned ride when being used.
Each of the interlocking Wood Lateral Sectional Files is secured with
the others in a stack with the use of a philips head screw driver. Stability
will be assured through the installation of an "Anti-tip" drawer
locking system that will allow for the use of every drawer.
*Guaranteed against defects in material and workmanship for five years.*
300 Series Hale Wood
Lateral File Case Dimensions
| 34-20 |
Top(crown) |
3"H x 341/4"W x 197/8"D (outside) |
wt. 15lbs. |
| 314-20 |
Lateral section |
141/4"H x 341/4"W x 197/8"D (ouside) |
wt. 61lbs. |
| "" |
"" |
91/2"H x 30"W x 161/2"D (inside) |
"" |
| 39-20 |
Leg base |
71/4"H x 341/4"W x 197/8"D (outside) |
wt. 15lbs. |
| 345-20 |
Closed base(not pictured) |
3"H x 341/4"W x 197/8"D (ouside) |
wt.15lbs. |
|
